Twin Cities Concrete Resurfacing
Worn, pitted, or discolored concrete gets a new working surface without a full tear-out. Cosmetic and functional resurfacing that extends the life of your existing slab by years.
The problem
Years of traffic, salt, weather, or use have left the concrete difficult to clean and uncomfortable to use.
How ATR solves it
ATR repairs and resurfaces the existing slab to create a renewed working surface.
The problem
Embedded staining and uneven appearance remain after ordinary cleaning or surface treatments.
How ATR solves it
ATR evaluates resurfacing options that cover the damaged surface and create a more uniform finish.
The problem
Full replacement appears to be the only option even though the underlying concrete may still be serviceable.
How ATR solves it
ATR determines whether targeted repair and resurfacing can extend slab life at lower cost and disruption.
The problem
A basement or garage floor is too damaged or irregular for a planned coating or residential flooring handoff.
How ATR solves it
ATR restores and prepares the concrete around the requirements of the next system or installer.
Same-Day
Completion
30+
Years Experience
16
Communities Served
Surface Renewal
Concrete resurfacing applies a new, durable surface layer over your existing slab. It addresses cosmetic damage — pitting, scaling, roughness, staining, and discoloration — without removing or replacing the concrete underneath.
The process starts with thorough surface preparation using our chemical-based Clean Slate system. Old coatings and contaminants are stripped without mechanical grinding, eliminating airborne silica dust and minimizing disruption to your living or working space.
Once prepped, a polymer-modified cementitious overlay bonds directly to the existing concrete, creating a smooth, even surface that's ready for coatings, flooring, or direct use. It's the cost-effective middle ground between patching and full replacement.
Make the Right Call
Resurfacing works best when the slab is structurally sound but the surface has deteriorated. Here's a quick guide.
Surface pitting, scaling, or roughness
Cosmetic damage only — the slab structure is fine.
Discoloration or staining
New surface layer covers old stains completely.
Minor cracking (hairline to 1/4")
Cracks are repaired first, then overlaid.
Major structural cracking
Underlying structural failure needs a new slab.
Significant settlement (2"+ drop)
The slab needs lifting before surface work.
Old coating that's peeling
We strip the old coating chemically, then overlay.
Where We Resurface
Any concrete surface with cosmetic damage or wear is a candidate for resurfacing — residential or commercial.
Restore pitted, stained, or deteriorating garage floors to a smooth, durable finish.
Resurface rough or damaged basement floors before coating or flooring installation.
Renew the surface of weathered driveways without full tear-out and repour.
Give aging outdoor living spaces a fresh, even surface for furniture and foot traffic.
Warehouse, retail, and facility floors restored to working condition with minimal downtime.
Smooth out rough or scaled pool deck surfaces for a safer, more attractive finish.
How We Work
Four steps from worn-out surface to renewed concrete — dust-controlled at every stage.
Our chemical-based Clean Slate process removes old coatings, contaminants, and loose material without mechanical grinding. No dust, no silica exposure.
Cracks, spalls, and damaged joints are repaired with appropriate fillers. The existing slab is brought to a sound, stable condition before any overlay.
A polymer-modified cementitious overlay is applied to the prepared surface. This bonds to the existing slab and creates a new, durable working surface.
The new surface cures under controlled conditions. We apply sealers or coatings as specified to protect the finish and extend the life of the overlay.
After the Work
Sweep or hose off debris regularly. For garage floors, a mild degreaser handles oil spots. Avoid harsh acids or wire brushes.
A fresh coat of sealer protects the overlay from moisture, chemicals, and UV exposure. We can recommend the right product for your surface.
If you notice chips or cracks forming, contact us. Small repairs prevent bigger problems and keep your warranty intact.
Use calcium chloride or sand for ice — never rock salt on resurfaced concrete. Avoid metal shovels that can gouge the surface.
Why Choose ATR
More than 25 years of concrete restoration across the Twin Cities. We know what products and techniques work in Minnesota conditions.
Our chemistry-first Clean Slate prep eliminates airborne silica dust caused by traditional grinding and shot blasting.
100% woman-owned, owner-led business. Fully licensed and insured for residential and commercial work.
Most resurfacing projects are completed in a single day. Your space is back in use within 24-48 hours.
We handle prep, repair, resurfacing, and coating in one project. No coordinating multiple contractors.
We test for moisture before resurfacing. If vapor transmission is an issue, we mitigate it first — so your overlay lasts.
FAQ
Resurfacing applies a new surface layer over your existing concrete — fixing cosmetic damage, pitting, and discoloration without removing the slab. Full replacement means tearing out the old concrete and pouring new. Resurfacing is faster, cheaper, and less disruptive when the underlying slab is structurally sound.
A properly applied resurfacing layer typically lasts 8-15 years depending on traffic, weather exposure, and maintenance. Garage floors and interior slabs tend to last longer than exposed driveways. We recommend resealing every 2-3 years for maximum lifespan.
Yes, as long as the cracks are stable and the underlying slab is structurally sound. We repair cracks as part of our surface preparation before applying the overlay. However, if the slab is heavily broken or has significant settlement, leveling or replacement may be a better option.
Light foot traffic is typically fine within 24 hours. Vehicle traffic should wait 48-72 hours depending on the product and conditions. We provide specific cure times based on your project.
The resurfacing products we use are formulated for northern climates and handle freeze-thaw cycles well. We apply during appropriate temperatures (typically spring through fall) to ensure proper curing. Interior projects like garage floors and basements can be done year-round.
Get a free, no-obligation estimate for your concrete resurfacing project. We'll inspect your slab, recommend the right approach, and provide a clear written quote.
Serving 16 communities across the Twin Cities from Fridley, MN
